Rod Mill

We are an oldest industry of crushing machines. We have experienced manufacturers of Mining Machinery. Foundation for the organization was laid in 1980s. We have grown a lot since that time. Currently we have independent research institutes where engineers are implementing new and better methods of mining.Our Vision is to become largest manufacturing industry of crushing machines and cocnrete manufacturing plants

We can provide program design, process flow design, standard and non-standard design for clients.if you are instered in our products,Please contact us or send e-mail to [email protected]

Overview

The Handling Materials and Function of Rod Mill:

Rod mill is mainly used for processing and crushing raw materials such as feldspar, quartz and ore, and also for the fine and medium crushing of many kinds of hard and crisp materials such as refractory matter, cement, steel grit, slag powder, copper ore, iron ore, gold ore sand, concrete aggregate and pitch aggregate.

ball_mill

The Performance Characteristics of Rod Mill:

The granularity of the final products is even, and the amount of the particles that are over crushed and ground is low. When used for coarse grinding, the processing amount of rod mill is higher than that of the ball mill with the same specification.

Rod Mill

Features

The features of rod mill are that in the ore grinding process, the grinding media contact with the ore in a linear manner, so that it has selective grinding function.

Working principle

The electro motor drives the cylinder to rotate through the reduction gears and the peripheral rack wheel reducer transmission, or the low speed synchronous motor directly drives the cylinder to rotate through the peripheral rack wheel reducer transmission. Inside the cylinder, there are proper ore grinding media-steel rod. Under the eccentric force and frictional force, the ore grinding media are lifted to a certain height and fall down in the state of dropping. The materials to be ground continuously go into the cylinder from the ore feeding mouth and are crushed by the moving grinding media, and then are discharged by the overflow and the force of continuous feeding to go to the next procedure.

Technical data

Model
Shell Specifications (mm)
Shell rotation speed
(r/min)
Feeding size
(mm)
Discharging size
(mm)
Processing capacity
(t/h)
Power
(kw)
Total weight
(t)
Diameter Length
MBS0918 900 1800 36-38 ≤25 0.833-0.147 0.62-3.2 18.5 5.9
MBS0924 900 2400 36 ≤25 0.833-0.147 0.81-4.3 22 6.7
MBS1224 1200 2400 36 ≤25 0.833-0.147 1.1-4.9 30 13.9
MBS1530 1500 3000 29.7 ≤25 0.833-0.147 2.4-7.5 75 19.8
MBS1830 1830 3000 25.4 ≤25 0.833-0.147 4.8-11.6 130 34.9
MBS2130 2100 3000 23.7 ≤25 0.833-0.147 14-35 155 46.5
MBS2136 2100 3600 23.7 ≤25 0.833-0.147 19-43 180 48.7
MBS2430 2400 3000 21 ≤50 0.833-0.147 25-65 245 59.7
MBS2736 2700 3600 20.7 ≤50 0.833-0.147 32-86 380 92.5
MBS2740 2700 4000 20.7 ≤50 0.833-0.147 32-92 400 95
MBS3245 3200 4500 18 ≤50 0.833-0.147 64-180 630 149

Related posts

Get Support Or Price